Add items to get started
DESCRIPTION
Special Handling Fee: This item is considered hazardous in volumes greater than gallon sizes and will include a special handling fee when ordered in individual units with volumes greater than a gallon. If shipped by air, this item will always require a special handling fee, regardless of volume.
Description:
6081 is a high build vinyl ester primer that offers high heat distortion and corrosion resistance with low porosity. It is also an FDA approved coating that is effective in a wide range of applications.
Product Features
- High heat distortion
- Blister Resistant Marine Application
- Corrosion Resistant
- High build
- Low Porosity
- FDA Approvable Coating
- Sandable
- Eliminates the need for PVA or Wax Surfacing Agent
Product Applications
- Below or Above Water Line Marine Repair
- Elevated Temperature Tooling Surface
- In-Mold Barrier Coat (Blister Resistant)
- Corrosion tank/Pipelining
- Secondary Containment Surface Coating
- Water Slides/Fiberglass Pools (When used with Lilly-Ram Top Coats, Ty Coat, and Epoxy/Polyester
Application Suggestions
- Mix Contents of Can Thoroughly
- The optimum temperature of 77º F
- Catalyze at 2% with MEKP initiator (10cc/pint)
- Utilization of HVLP spray gun optimizes finish
- Tip Size 2.5- 4.0mm
- Air pressure 25-40 PSI
- Build to 60 MILS without sagging or cracking (multiple passes required)
- Allow full cure (24 hours) prior to sand and polish or topcoat application
- Start with a flash coat (2 mils). Wait 2 minutes then start building coats of 4 mils per pass, up to optimum 24 mils
Specifications
Gel Time: 18-22 min @ 77ºF
Coverage (20 MILS): 100 sf/gal
Flash Point: 98ºF
Shelf Life: 3 months @ 68ºF
Dust Free Time: 30 min @ 77ºF